A roof replacement is a big job, and roofing materials are expensive. There are many different roofing materials to choose from depending on your budget, the style of roof you want, and more. In this blog post, we’ll discuss what roofing materials might be included with your roof replacement in Manhattan, so you know exactly what you’re getting for your money!
Roof Decking
Decking refers to the wooden boards that make up the roof’s framing. Your shingles and other components are put on these boards. You may need to replace the decking on your roof when you get a new roof. However, after they finish pulling off your old roof, your roofing contractor won’t know if it has to be replaced.
If rotten boards are discovered, your roofing contractor will have to replace them before installing your roofing components. However, if your contractor determines that the integrity of your decking is sound, it will be able to support your new architectural asphalt shingles.
Roof Flashing
Roof flashing is metal that is installed everywhere your shingles come into contact with another object, such as a wall, chimney, or open valleys. When you receive a new asphalt roof, you might not need to repair your flashing.
If your flashing isn’t rusted and the metal roof’s integrity is still intact, you won’t need to replace it. Roof flashing must be replaced if it is damaged, rusted, or if you are upgrading from a 3-tab to dimensional asphalt shingle.
Underlayment
Underlayment is a protective layer of felt (15 lb, 30 lb, or synthetic) laid over your decking. As a result, it’s an important part of your roof. Therefore, your residential or commercial roof replacement must include the installation of new underlayment.
Remember that your underlayment is the last line of defense for the decking in your roof system. Therefore, it’s critical to invest in the best roofing materials available.
Read this article on how a cheap roof system costs more in the long term to discover more about why you should invest in a manufacturer’s components.
Drip Edge
The metal roof flashing added at the roof’s margins to help restrict water flow away from your fascia and other roofing replacement components is known as a drip edge. When you obtain a new asphalt roof, you’ll need to replace the drip edge. Having it on your roof is actually against the law. In addition, it could lead you to fail a home inspection if it isn’t installed according to code.
You’ll have to remedy it before you can even put your house on the market if you pick a contractor that cuts shortcuts and doesn’t install your drip edge. Read this article to learn why selecting a local roofing contractor is critical to avoid this from happening to you.
Ice And Water Shield
Your roof valleys are critical for keeping water flowing down your roof in the appropriate direction. As a result, they require protection from the steady flow of water that occurs when it rains.
The waterproof membrane used to protect your roof from ice and water damage is known as ice and water shield.
New ice and water will need to be put around your roof penetrations and in your roof valleys when you receive a new roof. It’s also critical to keep your valleys free of debris as part of your roof maintenance.
If you don’t, water will run over your architectural shingles or soak through the barrier, producing leaks in the decking. Read this article on the necessity of regular roof repair to discover more about why it’s crucial to keep your valleys free.
Asphalt Shingles
The top layer of your roof that is visible to the outside world is your existing shingles. As a result, when consumers think of a roof replacement, they usually consider their shingles. Naturally, this implies that shingles will be included in your residential roof replacement. Just keep in mind that proper roofing techniques must be used when installing your shingles.
Read this article on the importance of appropriate roof installation to discover more about how proper roofing procedures affect your roof.
Ridge Capping
Ridge capping is the trim added at the apex of a roof where the two slopes meet. They’re thicker than normal shingles and come pre-bent to fit your roof’s ridges. During a roof replacement, the ridge capping must be rebuilt. Be warned that some roofing contractors try to save money by using 3-tab asphalt shingles as ridge capping.
They’re not meant for this, and one of the most common roof leaks could result. Always double-check your roofing quote with your contractor to ensure you’re getting true ridge capping.
Roof Vents
The trapped hot and cold air will drastically reduce the life of your existing roof if you don’t have sufficient attic ventilation. By enabling your attic to breathe properly, your roof vents prevent this from happening. That implies your roof vents will be replaced together with your roof. Whether you want to maintain using the same vents or switch to a different type, it’s up to you.
Read this article on the importance of appropriate attic ventilation to discover more about your vent options and how adequate attic ventilation benefits your roof.
Conclusion
When you undergo an asphalt roof replacement, the majority of your roof system’s components and accessories will be replaced. However, if your decking and flashing are in good shape, they may be left alone.
You now have a better understanding of the roofing material that will be used in your roof replacement. But aren’t you interested in learning more about the process of replacing your roof?
Understanding the procedure will help you anticipate what to expect on the big day. Fortunately, we’ve already considered this and written another post to inform you about the most crucial day in your roof’s existence. Find a professional NYC roofing contractor for your roof replacement like ours, TCI Manhattan. Then, contact us today to give you a free quote for the roof replacement costs!
